Skip to product information
1 of 7

ELECTOP

ELECTOP 4 in 1 AHD TVI CVI Coaxial HD Video Monitor Tester - CCTV, Analog, UTP Cable Test, VGA/HDMI Input, DC12V Output, 5 Inch [Upgraded]

ELECTOP 4 in 1 AHD TVI CVI Coaxial HD Video Monitor Tester - CCTV, Analog, UTP Cable Test, VGA/HDMI Input, DC12V Output, 5 Inch [Upgraded]

Regular price $200.99 USD
Regular price $258.99 USD Sale price $200.99 USD
Sale Sold out
Shipping calculated at checkout.

Brand: ELECTOP

Features:

  • The new HD Coaxial tester is developed for the on-site installation and maintenance of Analog Camera (CVBS) and HD Coaxial Camera, having TVI,CVI, AHD. (NOT Support IP Camera). It also provides many useful functions, such as video display, PTZ control, DC12V output power, audio test, image generator, VGA video signal input, HDMI1.0 signal input, RS485 data searching, cable testing, LED lamp etc.
  • Support CVBS + AHD (5MP) + TVI (5MP) + CVI (4MP) Camera Test, 4-In-1 CCTV Tester Monitor.5.0 inches 800 x480 High-resolution view angle display, more intuitive and easy to display the camera image quality, support PAL/NTSC standard video signal.
  • PTZ controller: Video monitor tester built-in Pelco-D / P PTZ control protocol,etc. , through its own RS485 interface, the user can control the PTZ up, down, left, right rotation, and adjust one machine zoom, focus,aperture size.
  • VGA/HDMI Input: It support VGA/HDMI 1:1 compliant digital input,once connect VGA/HDMI video,please switch selector to select VGA/HDMI Mode,The maximum resolution is 1920*1440. Video monitor tester, High-resolution 5.0 inches 800 (RGB) x480 wide viewing angle display, Viewing angle larger, more intuitive and easy to display the camera image quality. Support PAL/NTSC standard video signal.
  • DC12V 1A output power: Power the camera with DC12V (1A) power output from the tester. It is helpful for demo and testing when the power supply is not available. Rechargeable: Built-in 2600mA battery X 2,after charging 3-4 hour, working time lasts 11 hours.

Details: What You Need Know before Use:

1.To avoid the battery can't charge next time. Don't recharge it until the battery was completely used.
2.Before you turn it on,please check that it is not in VGA/HDMI Mode,otherwise the screen will flash,you can not control the buttons and it can not show the image clearly.
3.The tester need at least 4 hours to be completely charged,please make sure there is enough charging time each time to protect the battery.
4.Before charge it,please make sure it is turned off.

Product Features and Functions:

▶PTZ controller
▶Video signal testing
▶DC12V 1A output power
▶Image generator: Multi-format video OUT port image generator, sending a variety of standard (e.g. PAL, NTSC) color graphics section
▶Audio testing: Test the audio input from pickup devices. Connect the tester and pickup device with the audio cable.
▶Enhanced network cable testing: By UTP CABLE TEST port on the meter, you can test the connection of network cable.
▶VGA/HDMI input: Support VGA/HDMI 1.1 Compliant Digital input, once connect VGA/HDMI video, please switch selector to select HDMI or VGA mode
. ▶TVI camera test: HD TVI video surveillance testing, support 1MP, 2MP, 3MP, 4MP, 5MP. When TVI signal input, the tester will display HD TVI camera image.
▶AHD camera test: HD video surveillance testing, support 1MP, 2MP, 3MP, 4MP, 5MP. When AHD signal input, the tester will display the AHD camera image.
▶CVI camera test: HD video surveillance testing, support 1MP, 2MP, 3MP, 4MP. When CVI signal input, the tester will display the CVI camera image.
▶LED lamp: It is useful for the engineer to install and maintain security system at night; LED On/Off pressing button, easy to operate.

Package Dimensions: 8.8 x 6.9 x 3.5 inches

Binding: Electronics

View full details